How to control the quality of facial paper glazing?

When the varnish of the pre-printed carton paper is exposed to the bottom of the paper, the film surface is damaged, which is the main reason for the unqualified quality of the paper.

Among them, the semi-finished product drying method and the stacking amount are uncomfortable, which is the main reason for the mutual adhesion of the upper and lower printed sheets, which causes the bottoming, especially when the paper is a full version of the green and blue printing layout, it is easier to make the upper and lower papers Membrane surfaces that stick to each other and break through the bottom to destroy the glaze.
Therefore, for the paper with a large green and blue printing layout, it is best to use the air-laid paper rack with the air blowing device to erect the paper. If there is no special air-drying rack to dry, the glazed facial paper is placed in a plane overlap for drying. The height of each stack of air-laying should be controlled at about 25cm. After the coating layer is dry, the semi-finished products are stacked and stacked. However, the height of the dried semi-finished face paper stack should not exceed 150 cm.
In addition, it is necessary to adjust the appropriate proportion of glazing paint and thinner. The concentration of glazing coating should not be too high. According to the characteristics of glazing paper surface, a relatively suitable blending ratio should be mastered. When replacing glazing paints of different manufacturers and different types, it is necessary to first adjust the sample to carry out test glazing, carefully observe and analyze the condition of the test glazing process, and then formulate a suitable proportion of blending to avoid blindness. The glazing paint is blended to make the facial paper adhere to each other and damage the film surface, so that the quality of the glazing of the facial tissue can be well ensured.

Article source address: http://

Plywood Garden Furniture


For the person who has everything and still wants more-the polywood chair offers the utmost in comfort, convenience and great style. POLYWOOD furniture is constructed of solid POLYWOOD lumber that's available in a variety of attractive, fade-resistant colors. It won't splinter, crack, chip, peel or rot and it never needs to be painted, stained or waterproofed. It's also designed to withstand nature's elements as well as to resist stains, corrosive substances, salt spray and other environmental stresses. Best of all, POLYWOOD furniture is good choice.


FEATURES

  • Eco-friendly product made with recycled materials
  • Constructed of durable HDPE polywood lumber that provides the look of painted wood without the maintenance
  • Solid, heavy-duty construction withstands all of nature's elements
  • Polywood lumber requires no painting, staining, waterproofing, or similar maintenance
  • Polywood lumber does not splinter, crack, chip, peel or rot and it is resistant to corrosive substances such as oil, salt spray and other environmental stresses
  • Marine-grade quality hardware
  • Easy to clean with soap and water
  • Contoured to fit your body comfortably
  • Available in a variety of attractive, fade-resistant colors
  • 3-year limited residential warranty; 2-year limited commercial warranty

7PCS DINING SET

Plywood Garden Furniture


5PCS DINING SET

Plywood Garden Furniture

Please explore our website and let us know how we can best serve your needs. If you are looking for patio umbrellas, patio accessories, patio furniture cushions, welcome to contact us.




Plywood Garden Furniture,Wicker Plywood Garden Furniture,Garden Plywood Garden Furniture,Dining Plywood Garden Furniture,Plywood Dining Set

Golden Eagle Outdoor Furniture Co., LTD. , https://www.gepatio.com