Keep the floor dry and clean. Do not use the mop to wet the mop or scrub with alkaline water or soapy water to avoid damaging the brightness of the paint and damaging the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop. Apply wax once a month (or two months) (clean the water vapor and stains before waxing).
In case of heating or other water leakage on the ground, it must be wiped clean in time. It should not be directly exposed to the sun or electric oven to avoid excessive drying and cracking of the floor.
The painted floor can't stay for a long time. Don't cover it with plastic cloth or newspaper. After a long time, the paint film will become sticky and lose its luster. At the same time, avoid hot water basin, hot rice cooker and other things directly on the floor surface. Or padding the grass to avoid scalding the paint film.
If the oil stains can be wiped off with a rag or mop, warm water or a small amount of washing powder, you can also use neutral soapy water and a little washing to scrub. If the stain is serious, this method is invalid and can be gently wiped with high quality sandpaper or steel wool. If it is a stain of a drug, drink or pigment, it must be removed before the stain penetrates into the wood surface. The cleaning method is to wipe with a soft cloth dampened with furniture wax. If it is still invalid, it must be rubbed with steel wool and furniture wax. If the surface of the floor layer is burned by the cigarette butts, use a soft cloth dampened with furniture wax to wipe it back. If the ink is contaminated, it should be wiped with a soft cloth dampened with wax. If it is invalid, it can be wiped with steel wool and furniture wax.
After laying the paint floor, try to reduce the direct sunlight of the sun, so as to avoid excessive exposure of the paint to ultraviolet rays, and to crack and age in advance. Place furniture on the floor with rubber or other soft objects to prevent scratching the floor paint.
During the use of the floor, if individual floors are found to be upturned or falling off, the floor should be taken up in time, the old glue and ash should be removed, and the new glue applied and compacted; if the individual floor paint film is damaged or exposed, 400 water can be used. Sandpaper and soapy water are polished, then wiped clean. After drying, apply partial color. After drying, apply a lacquer again. After drying for 24 hours, polish with 400# water sandpaper, then polish with wax.
Outboard engine -- Outboard engine is a kind of hanging in the boat, boat stern plate, can push the boat, boat sailing removable power device, also known as outboard engine, boat operating machine, hanging machine. It is mainly composed of engine and transmission, operation, suspension device and thruster. It has the characteristics of compact structure, light weight, easy disassembly, simple operation and low noise. It is suitable for use in inland rivers, lakes and offshore. In the military, it is commonly used in the implementation of reconnaissance, landing, river crossing, patrol, and other tasks on the boat, boat and gate bridge. Civilian racing boats, yachts, short-haul transport boats and fishing boats can also be used. Some control boats are equipped with a variety of propellers for different boats and boats in empty and full load. The engine is mostly two-stroke gasoline engine
outboard engine boat engine outboard,petrol mini boat engine,gasoline Outboard boat motor Engine
Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com