The plate processor must be installed on a flat, clean indoor floor. For the convenience of operation and maintenance, the space left and right of the machine must be no less than 750mm wide. There must be sufficient entry and exit space before and after the machine. This article will introduce you to the price of the Ma Xi Dewei press machine.
Under normal circumstances, about 20 minutes after the plate machine is turned on, the development temperature can reach the set value, and the work requirements are gradually and steadily achieved. For a long time after the start-up, the development temperature has not been able to reach the set value, and the operation panel is "DEV TEMP LOW", and the platen machine cannot work under normal conditions. Another situation that arises from this is that the gluing barrel is quickly filled with blue liquid and diffused. It is often necessary to arrange some empty barrels to replace the gluing barrel to prevent liquid from leaking out onto the floor.
After the problem with the plate machine, the first thing that comes to mind is to check if the processor cycle system is working properly. After turning on the power, put your hand on the circulation system, there is a strong sense of shock, and there is also a fever, indicating that the circulation system works under normal conditions. The second is to check if the temperature sensing probe is working properly. Using a multimeter to detect, the scanner sensor is normal. Then check if the heating rod of the processor is burnt out. After replacing the heating rod, if there is still a malfunction, there is no problem with the heating rod of the processor.
Use the special cleaning agent for the platen machine, just dilute the concentrate with water, heat it to the developing machine tank and heat it to 30 °C, and start the cycle for 30 minutes to clean the dirt in the tank. Or dilute the concentrate with water, dip with a brush, brush the tank, rubber roller and brush. Please refer to the product's instruction manual for the specific dilution ratio.
Article source address: http://
With Electric Heating Plate Style Chafing Dish
With Electric Heating Plate Style Chafing Dish,Commercial Electric Chafing Dish,Chafing Dish Electric Warmers,Electric Warming Dish
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com