The quality of printed matter is influenced by many factors. Only with the evaluation standard of product quality can we effectively measure and control the plate-making, printing and finished products in accordance with the corresponding technical indicators.
Film measurement
The two colors of film include transmission density and dot area. Whether the film is accurate or not will directly affect the quality of subsequent processes.
The transmission density includes the haze and solid density of the film. The gray haze is the density of film films, and mainly monitors the light transmission performance of film films. The density value of the film base should not be higher than 0.05D. If the grayness is too high, the exposure during printing should be increased, resulting in too large changes in dots and the loss of small dots.
Click here to see all news pictures
The field density is also the highest density of the film, mainly to monitor whether the chemical procedures of exposure and development are correct or stable. Generally, the high density value should be between 3.8D and 4.0D (the laser film will be higher). If the density on the ground is too high, the resolution will be reduced; on the contrary, if the density is too low, the blank part will be easily underexposed during printing, which will cause undesirable phenomena.
The measurement of the dot area has two functions:-it is a linear phototypesetter, and the second is to see if the output dot area is correct. Linearization of imagesetter can avoid unstable output quality due to changes in developing and fixing conditions. If the film area of ​​the film is not correct, it will inevitably affect the quality of printing and printing.
Plate measurement
At present, the types of outlets used are amplitude modulation outlets, frequency modulation outlets, and hybrid outlets. The parameters to be measured for different types of outlets are different. For AM sites, you need to measure the percentage of network points, the number of network lines, and the angle of the network. For FM and mixed network points, you only need to measure the percentage of network points. No matter what type of dots are used, monitoring, dot halos, dot loss or excessive shrinkage are all important.
Click here to see all news pictures
After the printing plate. Check the image in the plate measuring instrument, you can monitor whether the stolen version and the dots are halo.
It is very important to have a delicate Fruit Knife, because in food, the key to determine the taste of food is not to cross the flavor. It is very necessary to prepare an extra fruit knife. Our fruit knife has a sharp edge, and its hardness and sharpness are well balanced under the master's technology. The knife can keep its cutting hand feeling and strength at the same time, thus greatly improving the performance of the knife. This kind of fruit knife will not lose too much water when cutting fruit, and the comfort of the handle will not be ignored. It is made of high-grade stainless steel, and the knife surface is smooth, bright and easy to clean. Our products are not only excellent in quality, but also price-friendly, which can greatly improve your quality of life.
Fruit Knife
Fruit Knife,Fruit Knife Set,Metal Fruit Knife,Stainless Steel Fruit Knife
Jieyang Huiyi Hardware Products Co., Ltd. , https://www.chinagdhuiyi.com