The quality of the wardrobe products is directly related to the health of consumers and the safety of life and property. With more and more 80s and 90s becoming new consumers, it is especially important to choose a safe and environmentally friendly wardrobe. How to distinguish the wardrobe is good or bad? The wardrobe not only depends on the cabinet plate, but also the hardware materials. From the plate and hardware can directly judge the quality of the wardrobe products, the quality of the pros and cons. Follow Xiaobian to find out.
Plate also depends on glue
The biggest component of the wardrobe is the sheet. The quality of the cabinet is directly related to the quality of the wardrobe and the health of the bedroom. A sturdy, environmentally friendly sheet makes you feel safe and secure.
From the perspective of environmental performance: particle board (solid wood particle board) > MDF (density board)
The formaldehyde emission of the board is mainly derived from the glue used for bonding. The high-quality density board is made by hydrolyzing the wood into fibers and then re-compacting. In the production process, the fiber material needs to be bonded by applying an adhesive, and the amount of the adhesive applied is about For 7% to 12%, the environmental protection is not easy to control, and the amount of glue used for solid wood particle board is less than 5%. In comparison, MDF is environmentally friendly.
From the nail holding power and moisture resistance: particle board (solid wood particle board) > MDF (MD board)
Interpretation: The holding force of the MDF is not as good as that of the particle board. It is easy to absorb moisture. The particle board has good moisture resistance and strong nail holding capacity. It is suitable for cabinet cabinets.
From the deformation resistance and load bearing of the board: MDF (MDF)> Particleboard (solid particle board)
Explanation: MDF is more suitable for wardrobe than solid wood particle board, because it is better than flat wood grain board for flatness, load-bearing, anti-deformation and service life, and is suitable for wardrobe style. In general, the price of MDF is higher than that of solid wood particle board.
Hardware needs to be light and heavy
Choosing a wardrobe depends not only on the cabinet plate but also on the hardware. The most important non-hinge in the wardrobe hardware is the poor quality of the hinge. When the door is used for a long time, it is easy to lean forward and loosen. Most of the big-name wardrobe hardware uses cold-rolled steel, which is stamped and formed at one time, with a thick hand and a smooth surface. Moreover, due to the thick coating on the surface, it is not easy to rust, strong and durable, and has strong bearing capacity. The inferior hinge is usually made of thin iron, and has almost no resilience. When used for a long time, it will lose its elasticity, resulting in the door closing. Not strict, even cracking. The following small series teaches you two tricks to identify high quality wardrobe hardware:
Look: the good quality front cover and base are very thick, and the forging is fine, smooth and without burrs, and the strength is high. The poor hinge forging is rough, the forging surface is thin, and the strength is poor.
掂: For products of the same specifications, if the quality is relatively heavy, the product density is high, the materials selected by the producer are relatively hard, and the quality is relatively guaranteed.
This classify is set for manual Breast Pump.To some degree,a suitable breast pump is essential for breastfeeding mons.Some mothers will choose a manual one,because it is light and portable.Besides,it is cheaper than an electric one.The manual one is made of PP and silicone material,BPA free,food grade.
Manual Breast Pump,Breast Milk Pump,Milk Extractor,Hand Breast Pump
Jiangsu Xinbei Electrical Appliances Co.,Ltd , https://www.whosalebreastpump.com