[ Chinese wardrobe net ] Wardrobe is cabinet furniture for storing clothes. Generally divided into single door, double door, embedded and so on. It is one of the furniture commonly used in the home. The good wardrobe design can bring a lot of convenience to the use of the follow-up wardrobe, which can be said to be once and for all. Therefore, when designing the wardrobe, we must pay more attention to it, consider the comprehensive, especially the composition of family members. Xiao Bian explained to you today what are the precautions for the wardrobe design. Collect and sort out some precautions for wardrobe design, summarized as follows:
Wardrobe standard design
1. The side panels and laminates of the closet need to be loaded with 18mm thick melamine pressure medium density fiberboard. The cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001 standard, formaldehyde release The quantity is ≤1.5mg/L, the water content is between 5-11; if the back plate does not need weight bearing, it can be made by 5mm thick, which can save cost. If the condition allows, the thickness of the door and back plate should be 9mm. For the wall cabinet, the back plate needs to use 18mm thickness and the density standard is 0.6-0.9g/cm3 to enhance the firmness of the wall cabinet;
2, although the overall wardrobe is tailor-made products, but there are also standard and non-standard points, the standard parts are calculated according to the specifications of the plate, the manufacturer can maximize the use of the plate, the sealing is generally uniform, can not see Black lines and sawtooth marks; non-standard parts will waste a lot of plates, so the price, non-standard price will be more expensive;
3, the metal frame of the closet door, the door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and currently it is dominated by aluminum. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger. The minimum metal wall thickness is required to reach 1.1mm.
4. The wardrobe door panel is made of glass, plate and other materials. The thickness of the glass is 5mm. The texture of the wardrobe door is frosted glass, clear glass, cloth glass and embossed glass.
5. The material of the sliding door track is: aluminum alloy, galvanized steel. The styles are: insert ceiling, side suspended ceiling, single rail, double rail. Door rails should be equipped with anti-collision dustproof devices and positioning systems. Prevent heavy objects and sharp objects from hitting the track, keeping the track straight and smooth.
6, top wheel and bottom wheel, ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastics, easy to wear? High-grade door wheel is stainless steel shell, high-precision bearing, smooth, no swing, pulley Special anti-jump device. The wheels are made of carbon fiberglass and can be pushed and pulled more than 100,000 times under a load of 180 kg. Some use ordinary plastic (may be engineering plastic or nylon) door wheel, oil on the door wheel to reduce the sound, cover up the defect, but in the future, it will stick a lot of dust, leaving behind trouble.
Wardrobe Closet,Freestanding Closet,Closet Designs,Built In Closet
shandong Changheng Wood Co.,Ltd , https://www.changhengwood.com