How should the engraving machine be maintained during the cold season?

We all know that the maintenance of engraving machinery and equipment is extremely important, and it also directly affects the service life of this equipment. However, the maintenance of the engraving machine is not only based on the use of the environment, the use of the season is also very important. Carving sculptures made the following recommendations based on winter maintenance:

The first is the temperature, although the effect of temperature on the engraving machine is not particularly large, but because many customers will butter the screw, the winter will certainly forget to clean, resulting in each movement will not be open. As the winter in the north is very cold, the temperature in the studio will be very low, and even if the oil machine is added, it will not move. At this time, we must ensure that the temperature in the workplace meets the minimum temperature for refueling standards.

The second is the cooling water. Since the cooling water needs to be changed every day in summer to avoid exceeding the specified temperature, many customers will ignore this in the cold winter and think that the temperature of the cold water won't increase much. Therefore, many customers often forget to change the water, especially in the winter, because the outside temperature is very low, the spindle motor heat is difficult to feel it. Therefore, we specifically remind customers that cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor and ensure the clean water cooling and the normal operation of the water pump.

The last is the cleaning problem of the engraving machine. Many users who have used the engraving machine think that the engraving machine does not need to be cleaned, and sometimes it is appropriate to clean it up. Because they think that the engraving machine itself will produce a lot of dust during use, if you go to clean up every day will be very troublesome, this will easily damage the engraving machine, reduce the service life, the correct approach should be the end of work should promptly clean the table This will provide convenience for the next job. Clean the guide rails and the material swarf next to the guide rails to prevent the machine from jamming during operation due to debris interference. Regularly clean the screw to prevent sticking foreign material on the screw. The screw is very important in the equipment. He determines the accuracy of the machine, and the screw also plays an important role in the transmission process.

 According to the consumer's buying habits and the demand for the product , our main products include trolley luggage , which are made of ABS+PC , ABS , PC , PU , PP, and the usability is divided into directional wheel, universal wheel and the latest detachable universal wheel trolley case. The luggage is easy to carry and can avoid many troubles when you carry travel goods. You can also choose luggage 3 stes to suit your family's needs . Our products are well known for quality materials , superior craftsmanship ,durability and All of   our products are inspected by strict quality control , Thus, our product quality is very steady and reliable. 

Travelling Luggage

Travelling Luggage,Luggage Bag,Abs Travelling Luggage,Travelling Suitcase

China Amulite Sunrising Luggage &Bag Products Group , https://www.chinabluesunrising.com