After buying the cabinet combination parts, the purchase is no longer a problem.

The whole cabinet is composed of cabinets, range hoods, gas cookers, disinfection cabinets, etc. For this reason, the quality of the accessories is good, and the quality of the whole cabinet is naturally high. Then, in the overall cabinet market where the current brands are numerous and the price difference is large, is it so difficult to pick a cost-effective cabinet? In fact, the structure of the whole cabinet is nothing more than an individual. Therefore, whether you know how to choose the combination of cabinets is the key to whether you can buy high-cost cabinets.

The first is the most practical hardware accessories. The basic hardware of the cabinets are hinges and drawers (sliding rails). The quality of cabinet hardware is directly related to the service life and price of the cabinet. Better cabinets generally use imported cushioned hinges and drawers (sliding rails) and hydraulic rods. The well-known imported hardware brands in China are Hettich, Blum, etc. Their service life is generally more than 100,000 times. In addition, an important condition for measuring the cost performance of a cabinet is the drawer (sliding rail), in which the metal drawers gradually become the mainstream of the market. According to the reporter's experience, if consumers feel that the price of these imported hardware accessories is higher in the cabinet store, then after calculating the number and type of hardware accessories required, you can save a lot of money through online shopping.

Followed by the countertop. It is understood that from a practical point of view, due to the current variety of synthetic quartz countertops, but due to the poor market technology, lack of uniform process standards, the selection of marble will be relatively simple and reassuring. Secondly, in the selection of the bottom panel inside the cabinet, many merchants now let the buyer choose the waterproof and moisture-proof synthetic bottom plate, but in fact, it is difficult for the buyer to use the cabinet panel in a short time. Waterproof performance is well understood, and the bottom of the cabinet is often subject to explosions, dark leaks, etc. So choosing natural marble will be a cost-effective option.

The third is the production process. After the cabinet is put into use, the phenomenon of door panel expansion and deformation often occurs, which is caused by imperfect edge sealing technology. To this end, the appearance of the purchase should be checked whether the door and the edge of the cabinet are neat and smooth. The ability to design and produce using the 32mm process is also an important condition for measuring cabinet quality. According to reports, the use of 32mm process for design and production, not only can improve production efficiency, but also improve and ensure product quality. The most obvious mark of 32mm is the two rows of system holes on the side panel, which can be accurately installed through the system.

The fourth is the door panel. The solid wood door panels are rich in shape and true in color, which is the first choice for classical decoration style. However, the disadvantage of solid wood door panels is that the price is high and the process is difficult to control. There are too few solid wood door panels on the market. Deformation cracking is the most common problem for solid wood door panels, and cleaning is also a headache. In addition, the materials used in the countertops and the internal structure materials are also very particular.

Finally, after-sales service It is understood that the warranty period of different parts of the cabinet is not the same, so consumers must ask the product warranty and other issues when ordering the cabinet.