[ Chinese wardrobe net ] veneer
Woodworking Wardrobe : Generally, a large amount of glue is used for lamination. The flatness and the rubber are easy to be neglected, and most of them will not use brand glue. This will increase the amount of formaldehyde released and will have a taste. This is why ventilation has been used for a long time. The reason for not being volatile. So pay special attention to playing the cabinet yourself.
The overall wardrobe : glue will also be used, but the quality of the glue can be understood from the certificate. It is also necessary to pay attention to the licensing cycle. It is better to have a brand than a brand.
Edge banding
Woodworking Wardrobe: This is the pain of the woodworking wardrobe forever, can not be solved perfectly; can not use the machine edge banding like the big factory, the fly in the ointment.
Overall wardrobe: This is the strength of the machine cabinet. Super pressure and glue can achieve very beautiful results, but you need to pay attention to the texture and color of the edge band, whether it can be consistent with the cabinet of all colors. Yuman adopts the German Haomai edge banding machine, and the effect is natural.
Plate
Particleboard, MDF PK finger joint board, wood board
In addition to a small number of high-end solid wood furniture custom, most custom furniture manufacturers generally use particle board, MDF as a substrate to customize furniture, and woodworking site commonly used wood board, finger joint board.
Artificial boards such as particleboard and MDF have the highest application rate in European countries. They are healthy, environmentally friendly and durable. They are mainly used to produce panel furniture such as cabinets and wardrobes.
Why is woodworking on-site production not using particleboard? In the eyes of woodworkers, particleboard is wood slag, which is very bad, and it is off grade. Why do many decoration woodworkers say this? Because their manual machinery can't use the particle board to make the cabinet on the spot! A saw goes down the board and bursts. When the board bursts, it is scrapped, and the wood board, finger joint board, manual mechanical operation, at least will not burst. Therefore, in the eyes of carpentry, the wood board and the finger joint board are their treasures. The 18-style martial arts is all based on it. Can you dislike it? The particleboard is like a young lady in the city, wearing beautiful clothes, full of temperament, temperament, need to be served. Fragile particleboards must be machined to be sawn (eg, electronic cutting saws). This good sawing effect is the key to good edge sealing.
Let me talk about the edge of the woodworking site, hand-adhesive, a bit similar to the custom-made factory in the shape of the edge, is also done by hand, but there is also a semi-automatic hot melt coating machine in the factory, by hand in the wood The slag and the wood board are glued to the sidebands. You can understand them at a glance. I believe you also know why the big brand cabinet wardrobes are using solid wood particle board.
Shenglu International Environmental Protection Wardrobe Plate can be found on the official website to ensure the quality of the board.
Production process
Factory-based production, due to the requirement for a certain amount of production capacity and processing quality, generally uses large machinery to complete the production. Therefore, the product has high precision, good edge sealing strength and beautiful appearance, and high installation accuracy. Yuman uses the industry's leading machine equipment operation, and 9 detailed process upgrades, from the inside to the outside, to achieve perfect production.
The furniture is made on site, even if the samples you see are OK, but the precision of the furniture made by your home may not be in a grade. Because on-site production depends entirely on the craftsmanship of the woodworkers.
Environmental protection
Since the state has mandatory environmental standards for wood-based panel products, the national standard is to reach the E1 level. However, the environmental protection of furniture is not limited to the environmental protection requirements of the board. For example, the sheet can reach the E1 level, but the secondary veneer processing, the edge sealing glue problem, etc. are not well controlled, and the formaldehyde of the furniture will still exceed the standard. Shenglu International adopts EO grade plates, and edge banding glue also uses well-known brands to ensure the total release of formaldehyde.
The furniture produced on site has a large amount of urethane glue used inside the wood board. The formaldehyde content is high. Because the product structure is glue and nail, a lot of glue is needed during processing. Most of the glue used has formaldehyde exceeding the standard, so the site is made. The furniture is extremely environmentally friendly. Especially when there are owners present, in order to show that they don’t cut corners, the things on the site are strong, and they may also tell you to apply more glue. I don’t know if the formaldehyde content of the furniture is higher. Grade.
Handling installation
Woodworking wardrobe: generally fixed with a round nail, can not be dismantled, because the dismantling will cause devastating damage to the cabinet and the backboard, affecting the reuse of the cabinet.
The overall wardrobe: mostly fixed with fasteners, can be removed, in the case of the size of the dismantling environment does not match, you can take partial adjustment, patching, etc. for local adjustment.
On-site management: There is no problem of on-site production in the factory. It only needs to be installed directly when the decoration is basically completed. Since it is connected by a dedicated connector, the installation is now quick and easy. And one of the advantages of custom furniture is the detachable, expandable features and additions and subtractions. The professional installation team of Shenglu International has no need to say in the installation process, and it is also paid more attention to the service. After the installation is completed, it will be cleaned up for you. You can not clean it before you check in. Save your time.
Garden sprayer is one kind of sprayers , it has a capacity of 1L / 1.5L / 2L / 3L , the material is PE and different color can be offer , stepless can be adjusted . it has high corrosion resistant and durable . Front switch is more easy to control , The Working Pressure is from 2 to 8pa , it can be used for gardens , parks , botanical gardens , etc . Garden sprayer has better quality and better drainage . It's very convenience to be used . The effect of fog water is very good , it can also be spray straight line . Meanwhile the size of the atomization can be mediated , also there's an exhaust valve in it , When the pressure is out of range , it can protect your safety . Garden sprayer has already been the daily tool for people to make plants better . We have many advantages over other products , first of all , we are very stricted in controling over the raw materials . Sencondly , we have more than 20 years experience in mold translation . Thirdly , we will carry out a complete inspection of each product , we have a complete set of testing equipment to ensure that each product to the hands of customers have no quality problems . It will help your daily life more convenience , more safe.
Garden Sprayer,Garden Pressure Spray Pump,Garden Master Pressure Sprayer,Garden Pressure Sprayer
YUYAO ZHENGYU SPRAYER FACTORY , https://www.zysprayer.com