[ Chinese wardrobe net ] Wardrobe is the furniture in our daily life, many people will choose their own custom wardrobe, then what is the standard design of the wardrobe? What are the precautions for making a wardrobe? Let's take a look at it.
What is the standard design of the wardrobe?
1. The side panels and laminates of the closet need to be loaded with 18mm thick melamine pressure medium density fiberboard. The cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001 standard, formaldehyde release The quantity is ≤1.5mg/L, the water content is between 5-11; if the back plate does not need weight bearing, it can be made by 5mm thick, which can save cost. If the condition allows, the thickness of the door and back plate should be 9mm. For the wall cabinet, the back plate needs to use 18mm thickness and the density standard is 0.6-0.9g/cm3 to enhance the firmness of the wall cabinet;
2, although the overall wardrobe is tailor-made products, but there are also standard and non-standard points, the standard parts are calculated according to the specifications of the plate, the manufacturer can maximize the use of the plate, the sealing is generally uniform, can not see Black lines and sawtooth marks; non-standard parts will waste a lot of plates, so the price, non-standard price will be more expensive;
3, the metal frame of the closet door, the door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and currently it is dominated by aluminum. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger. The minimum metal wall thickness is required to reach 1.1mm.
4. The wardrobe door panel is made of glass, plate and other materials. The thickness of the glass is 5mm. The texture of the wardrobe door is frosted glass, clear glass, cloth glass and embossed glass. The material of the sliding door track is: aluminum alloy, galvanized steel. The styles are: insert ceiling, side suspended ceiling, single rail, double rail. Door rails should be equipped with anti-collision dustproof devices and positioning systems. Prevent heavy objects and sharp objects from hitting the track, keeping the track straight and smooth.
5, the top wheel and the bottom wheel, the ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastics, easy to wear? It is afraid of treating stainless steel casing, high-precision bearing, smooth, no swing, pulley Special anti-jump device. The wheels are made of carbon fiberglass and can be pushed and pulled more than 100,000 times under a load of 180 kg. Some use ordinary plastic (may be engineering plastic or nylon) door wheel, oil on the door wheel to reduce the sound, cover up the defect, but in the future, it will stick a lot of dust, leaving behind trouble.
Do the wardrobe considerations
1. Older people have more clothes stacked and fewer pendants, and most of them may not be worn for a long time. Therefore, you can consider more independent laminates and drawers when designing, and store less clothes separately. Considering that the elderly are inconvenient to move, the drawer should not be designed at the lowest or lower position, and should be about 900mm above the ground, so that the elderly can easily take the clothes;
2, husband and wife's clothing, it is diverse, there are professional dress, casual wear and sportswear and so on. Generally, the left and right sides are respectively set as the storage space of the husband and wife, if the room area is large enough. The clothes in the cabinet are divided into two layers, which are windbreakers, dresses or tops. Shirts, tops, etc. can be hung in short layers or can be placed in separate small drawers or laminates, but not too much. Will wrinkle the clothes. Underwear, ties and socks can be used with special fashion drawers, luxurious tie clips and pants racks, which are beneficial to the maintenance of clothes and more intuitive and convenient; seasonal and strong clothes such as sweaters can be placed in the top cabinet;
3, children's clothing, on the one hand taking into account the placement of children's toys, it is best to design some drawers, laminates or lattices in the design of the wardrobe, on the other hand, taking into account that children's clothing will grow with age Frequent replacement, so it is necessary to design some places such as clothes and other pendants, and the color of the wardrobe of the children's room is also very particular, should be based on warm colors.
Aquarium Feeder,Automatic Fish Feeder For Aquarium,Automatic Fish Feeder For Pond,Aquarium Fish Feeder Automatic
Shenzhen GAKO Aquatics Products Co., Ltd , https://www.gako-aquarium.com