[ Chinese wardrobe network ] In today's wardrobe market, the overall wardrobe continues to heat up, and is loved by consumers. However, consumers often have doubts about how to choose a wardrobe. Here, Xiao Bian deliberately starts from the three aspects of the panel, edge banding and veneer of the wardrobe, and teaches consumers to identify the advantages and disadvantages of the wardrobe.
Overall wardrobe purchasing skills
1, look at the selection of the wardrobe
Professional manufacturers use all the plates that meet the national testing standards. Non-professional manufacturers choose some non-test reports, which have certain potential threats to human health. Therefore, to buy a wardrobe, it should be seen whether the manufacturer has a plate inspection report and relevant testing certificate from the national authority inspection department.
2, look at the wardrobe sheet veneer
Some wardrobes look good on the surface, and they can be scratched with a light stroke. These wardrobe surfaces are affixed with low-priced styrofoam on the market, which looks good and has poor wear resistance. Professional manufacturers generally use environmentally-friendly veneers with thick thickness and high temperature and high pressure treatment, which have high surface strength, abrasion resistance and scratch resistance.
3, look at the edge of the wardrobe sheet
Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets, because it effectively prevents moisture from entering the interior of the sheets. Some manufacturers do not have professional equipment, the cutting is rough, and there is obvious chipping around.
4, look at the wardrobe back panel structure
Professional manufacturers use a backing plate with a thickness of 5mm or more, and adopt a recessed-type reverse leather lap joint structure to prevent the back plate from directly absorbing the moisture on the wall surface. Some brands have thin back plates and are connected by nail-type back plates. The back plates are in direct contact with the wall. The moisture on the wall is easily absorbed by the plates, which is easy to get wet, moldy and deformed, and the cabinet loses its seal. Sex.
5, look at the wardrobe hardware accessories
Professional manufacturers use famous factory accessories, quality assurance. Accessories are often hidden, consumers are difficult to identify, and you have to carefully push and pull. Accessories are an important element of wardrobes, bookcases and sliding doors, and are important indicators for ensuring the comfort and durability of household products.
6, look at the manufacturers anti-counterfeiting signs and services
Professional manufacturers in the wardrobe edge strips, cabinet door profiles, pulleys, and even sheet veneers, there are obvious manufacturers of anti-counterfeiting labels, quality, maintenance are guaranteed, consumers can rest assured to use.
7, look at the matching and systematic of furniture
Professional panel furniture manufacturing enterprises can not only make wardrobes, cloakrooms, bookcases, but also provide system home furnishing products such as shoe cabinets, wine cabinets, beds, dressing tables, bedside tables and rotating hangers.
Experts teach you three tricks to see through the quality wardrobe
Whether the wardrobe board is environmentally friendly
The formaldehyde content of the board is the primary factor to consider when purchasing a wardrobe, as this is closely related to our health. When shopping, consumers can close the door and wait for about 5 minutes, then yank open the door and smell the nose with no smell. There is an odor indicating that the formaldehyde content may exceed the standard and is a poor quality product.
Is the wardrobe edge tight?
Some manufacturers have no professional equipment, and the production of the wardrobe products is rough, and there are obvious edge collapses around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life. Professional manufacturers use precision panel saws to cut sheets without cracking around the sheets. After sealing around, it can effectively prevent the moisture in the air from intruding into the interior of the board.
Whether the wardrobe veneer is wear-resistant
The professional manufacturer uses the environmentally-friendly melamine veneer with thick thickness and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance. Inferior wardrobes produced by unscrupulous merchants are selected from low-priced panels on the market. The surface is covered with Pauli paper and ornate paper sheets. It looks good. In fact, the wear resistance is poor, and it can be clearly marked with a fingernail. Scratches.
The whole wardrobe is very popular because it is environmentally friendly, durable, beautiful, space-saving, and the purchasing method is relatively simple. As long as you read the above precautions, you will have no worries.
Power Hair Dryer with advanced Tourmaline Ceramic fusion technology dries hair super fast while reducing frizz. watt dryer is charged with negative ions to keep hair healthy and hydrated. Includes curl diffuser and concentrator attachment. Power Dryer has a flip-open vent to allow for easy cleaning Features multiple heat and speed settings as well as a locking cool shot.
Best Blow Dryer,Travel Hair Dryer,Professional Hair Dryer,Lightweight Hair Dryer
Ningbo Meirou Electric Appliance Co.,Ltd. , https://www.mrhaircurler.com