[ Chinese wardrobe net ] the surface of the water board is not flat, the moisture content is over 12%
Wood floors and wardrobes , particleboards and high-density fiberboards for cabinets are almost inferior or scrapped once they are soaked in water. Since the wood fiber expands after a large amount of water enters the water and changes the original structure, it will be deformed and stripped. Some companies have simply dried the process, scraped off the foaming paint, and then went to the market with a layer of paint. I don't know, after the water floor is paved, there will be uneven surface. After a long time, the moisture inside the floor will evaporate to the surface. Even if the paint is covered again, there will be mildew on the surface. Professor Zhang Binyuan said that if the wardrobe, the particleboard of the cabinet, and the high-density fiberboard are raining, the problem is not big after drying. However, the soaking time has been long and it can no longer be used. So, how do consumers identify the floor and wardrobes and cabinets that have been soaked in water? In fact, it is very simple, the wooden floor, the closet and the cabinet panel that have been soaked in water, as long as there is no change in the size and shape of the surface, the floor is spliced ​​together to see if there is any unevenness, a large curved gap, or a large size Just wait for the situation. If there is any controversy, use the instrument to test the moisture content. If the moisture content of the floor exceeds 12%, it is best not to buy it.
GlazeKing Ceramics TechnologyCo.,Ltd. , https://www.glazekingceramics.com