[ Chinese wardrobe net ] cabinets are an important part of bedroom furniture, and also constitute one of the large pieces of bedroom furniture. Therefore, the quality of cabinets directly affects the sales of the entire product. According to incomplete statistics, the most dissatisfied consumers are the warping deformation of the cabinet door. “Actually, in addition to materials and design reasons, the adverse effects of the processing process are the main reason for the bending deformation of the high cabinet long door,†said a senior panel expert.
Avoid using irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.
Wooden wardrobes can be wiped with a clean rag, but if it is dirty, use soap or a neutral detergent and wipe it with a damp cloth.
Ultraviolet light is also destructive to wood furniture, so proper use of fabrics or curtains to avoid sun exposure is necessary.
If you want to wax, it is best to choose a wax with a high concentration and solid, free of silicon, so as not to damage the paint surface.
Improper paint treatment causes deformation of the deformed parts of the plate furniture parts. In the production, some operators are convenient for the drawing, the plates are stacked at random, or the plates of the stacked plates are not flat, and even more, the plates are inclined at The wall causes the panel to deform due to its own weight before entering the next process. The coating process causes deformation During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes. The effect of finishing putty In the decoration of the door parts, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density Fibreboard and particleboard are particularly hygroscopic, so when one side of the door panel is not putty, and the other side is coated with such a water-rich putty, the door panel part is hygroscopic and deformed.
The influence of the drying process is in the production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, it will also cause the door. The part was found to be bent and deformed during the drying of the paint. The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.
Thermal roll paper
Thermal paper is also called thermal fax paper, thermal recording paper, thermal Copy Paper, and thermal copy paper in Taiwan. Thermal paper is a kind of processed paper, and its manufacturing principle is to coat a layer of "heat sensitive paint" (heat sensitive color change layer) on high-quality base paper.
Although there are more than a dozen chemicals used in this color change layer, there are at least the following compounds: leuco dyes, the dyes are of a wide variety, the most commonly used are fluorescent compounds; the color developer accounts for less than 20%, and the commonly used are double Phenol, p-hydroxybenzoic acid; sensitizers account for less than 10%, which contains benzenesulfonic acid amide compounds; fillers account for less than 50%, commonly used calcium carbonate (fine particles); adhesives account for less than 10%, Such as polyvinyl acetate; stabilizers, such as dibenzoyl terephthalate; lubricants, etc.
Therefore, the process is difficult and the technical requirements are high.
Thermal paper is generally sold in the form of rolls, generally 80mm×Φ60mm, 57mm×Φ50mm and other specifications are the most common. The first number indicates the width of the paper roll, and the back is the diameter. The general error of the width of 1, 2mm will not affect the use, because Printers generally can`t print on the edge
Thermal Roll Paper,Thermal Paper,Thermal Printer Paper,Thermal Receipt Paper
Shijiazhuang Qiancen Industry Co.,ltd , https://www.yuyilang.com